User Tools

Site Tools


This is an old revision of the document!

MIDI Setup (Windows)

Once you have successfully connected your tablet and computer to the same network (whether ad-hoc or router), you will need to setup MIDI ports.

You need to have the Lemur Daemon running, as well as some 3rd party virtual MIDI ports. There are a number of different virtual MIDI ports, such as loopMIDI ofloopBe. Check them out and choose whichever suits you best.

Once you have created virtual MIDI ports, you can assign a MIDI Target in Lemur. The Lemur Daemon is very powerful, and allows up to 8 independent MIDI ports. (Each MIDI port has 16 MIDI channels, and of course on each MIDI channel you can have a full range of MIDI notes and 128 different CCs!) You can configure MIDI Targets in the Lemur Daemon or in the Lemur app itself. A typical configuration would be the following:

MIDI Target 0 Input: loopMIDI A Output: loopMIDI B

Make sure to never use the same MIDI port for input and output, as that would create feedback. You are now ready to send and receive MIDI messages from Lemur. Try out a factory template such as “iPad - Studio Combo”, and move the faders. Try mapping these in your favourite DAW. Once you get the hang of it, you can explore the Liine User Library or the Liine Forum to discover hundreds of Lemur templates.

First, make sure the Lemur Daemon is running on your computer. Then, go to the settings in the Lemur app and select Daemon Input/Output 0 in MIDI Target 0. (advanced users can configure several targets, as they please)

If you are using a hardware interface (iRig MIDI, iConnect MIDI, etc), you do not need to use the Lemur Daemon.

lemur/connection/midi/win.1416916244.txt.gz · Last modified: 2014/11/25 12:50 by nicolas