User Tools

Site Tools


This is an old revision of the document!

MIDI Setup (Windows)

Once you have successfully connected your tablet and computer to the same network (whether ad-hoc or router), you will need to setup MIDI ports.

This applies for iOS Wi-Fi connections (router or ad-hoc), or any type of Android connection (router, ad-hoc or USB tethering)

If you are using an iOS device with a hardware interface (iRig MIDI, iConnect MIDI, etc), these instructions do not apply (you don't need to use Lemur Daemon or virtual MIDI ports).

Virtual MIDI ports

You need to have the Lemur Daemon running, as well as some 3rd party virtual MIDI ports. There are a number of different virtual MIDI ports, such as loopMIDI ofloopBe. Check them out and choose whichever suits you best.

Once you have created virtual MIDI ports, you can assign a MIDI Target to Lemur. You can do this in the Lemur Daemon GUI or in the Lemur app itself. A typical configuration would be the following:

  • MIDI Target 0
  • Input: loopMIDI A
  • Output: loopMIDI B

Note: Make sure to never use the same MIDI port for input and output, as that would create feedback.

When you're setup, a good test is to try out a factory template such as “iPad - Studio Combo”, and move the faders. Try mapping these in your favourite DAW. Once you get the hang of it, you can explore the Liine User Library or the Liine Forum to discover hundreds of Lemur templates.

lemur/connection/midi/win.1416917216.txt.gz · Last modified: 2014/11/25 13:06 by nicolas